Copper-Nickel Composite Strip — ISO 9001 Certified, Consistent Batch Quality

A custom-built composite strip is only as valuable as its repeatability: the same construction, the same layers, the same surface, order after order. This copper-nickel composite strip is produced in a 12,000 m² factory with a capacity of 1,200 tonnes per year, under an ISO9001 quality system with SGS inspection support. Every batch is inspected against the drawing and documented with EN 10204 3.1 material certificates. No grade designation applies — the construction is the specification, confirmed per drawing before production.

MOQ and exact tolerances are confirmed per drawing.

• ISO 9001 certified production — certified quality system, plant-wide.
• Batch consistency — uniform clad ratio, layers and surface from coil to coil.
• Scale and capacity — 12,000 m² factory rated at 1,200 t/yr since 2002.
• Documented deliveries — per-batch inspection records and EN 10204 3.1 material certificates.
• Custom-built per drawing — construction, clad ratio and dimensions confirmed at order.

Changzhou DLX Alloy Co., Ltd. has operated since 2002 in a 12,000 m² nickel-alloy facility rated at 1,200 tonnes per year. That scale means custom composite strip can be produced without compromising lead times, with quality-system control applied at every step.

Consistency is the product. Clad ratio, layer thickness and surface condition are held uniform from coil to coil, verified per batch and recorded against the drawing — so what you specify in the first order is what you receive in the tenth.

Construction (single or double-side cladding), clad ratio, thickness, width, length and surface finish are all manufactured per drawing. Tell us the application and the drawing, and we confirm the strip specification before production.

This composite carries no grade designation and is quoted per drawing, based on construction (single or double-side cladding), clad ratio, dimensions and quantity. No indicative price range is published for this product — request a quotation with your drawing for a firm price.

Physical properties (density, electrical conductivity, tensile strength) depend on the core/clad ratio and layer thickness. Values are confirmed per drawing — no catalogue values are claimed for this composite.

• Per-batch inspection against the drawing (dimensions, layers, surface)
• Traceability records for every batch
• EN 10204 3.1 material test certificate available on request
• ISO9001 quality-system control across production

Strip is packaged for export with edge and surface protection. Lead time: 7-15 days. Shipping documents and inspection records accompany every shipment.

Changzhou DLX Alloy Co., Ltd., established in 2002, operates a 12,000 m² factory rated at 1,200 tonnes per year under an ISO9001 quality system with SGS inspection support. Consistency is the product: the same construction, the same layers, the same surface from coil to coil, verified per batch and documented with EN 10204 3.1 material certificates. That discipline is what makes a custom-built composite strip repeatable across orders.

A: Production runs under an ISO9001 quality system with SGS inspection support, and EN 10204 3.1 material test certificates are available with shipment.

A: Clad ratio, layer thickness and surface condition are held uniform from coil to coil, verified per batch and recorded against the drawing.

A: No — no grade designation applies. The specification is the construction: copper core, nickel cladding, clad ratio and dimensions, all per drawing.

A: Construction (single or double-side cladding), clad ratio, thickness, width, length and surface finish, all per drawing.

A: MOQ is confirmed per drawing; samples available on request (shipping at the customer's cost). Lead time: 7-15 days.