Inconel X-750 Spring Wire For Aerospace And High-Temperature Applications

ISO9001 & SGS Certified | Est. 2002 | 12,000 m² Factory | Precision ±0.01mm | 3–7 Day Dispatch

Inconel X750 spring wire from Changzhou DLX Alloy Co., Ltd. is an age-hardenable nickel-chromium-iron alloy engineered for the most demanding spring applications where failure is not an option. Gamma-prime strengthened for best-in-class relaxation resistance up to 870°C, manufactured through multi-pass precision cold drawing with oxygen-free controlled-atmosphere heat treatment, and delivered with dimensional tolerance consistently held to ±0.01 mm. When aerospace engine controls, nuclear reactor safety systems, and industrial gas turbine hot sections demand a spring that holds its force through millions of cycles at extreme temperatures, Inconel X750 wire from DLX delivers. Full EN 10204 3.1 MTC traceability on every spool.

• ±0.01 mm precision — Multi-pass cold drawing with real-time in-line diameter monitoring. Every millimeter of wire on every spool within ±0.01 mm of nominal. Uniform spring rate across your entire production run.
• Tailored delivery condition — Solution-annealed for maximum coiling formability. No. 1 temper for balanced formability and strength. Spring temper for finish-grind-only operations. We match the wire to your process.
• Full traceability — heat to spool — Every spool linked to original vacuum-melted heat number. EN 10204 3.1 MTC with complete chemistry and mechanical properties as standard. Documentation chain complete for flight-critical and nuclear-safety components.
• Gamma-prime optimized heat treatment — Controlled-atmosphere annealing and aging cycles tuned for X750's precipitation kinetics. Consistent gamma-prime size and distribution across every batch.
• Oxygen-free processing — Every annealing operation under protective atmosphere. No surface oxidation, no decarburization, no intergranular attack. Bright, clean wire surface ready for coiling.
• In-house from melt to spool — Vacuum melting, forging, rolling, drawing, heat treating, and testing all under one roof. One team, one quality system, consistent results.

Changzhou DLX Alloy Co., Ltd. was founded in 2002 with a single focus: nickel-based specialty alloys. We are not a general wire mill — every drawing die, annealing furnace, and quality checkpoint is designed around nickel alloy wire manufacturing.

• 12,000 m² dedicated facility — integrated vacuum melting, forging, rolling, multi-pass drawing, controlled-atmosphere heat treatment, and testing under one roof
• 1,200-ton annual capacity — automated drawing lines with in-line diameter monitoring at every pass, maintaining ±0.01 mm consistency
• Nickel alloy wire specialization — manufacturing experience spanning Inconel, Monel, Hastelloy, Incoloy, NiCr, CuNi, FeCrAl, thermal spray, thermocouple, and precision alloy wires
• Five product forms — bar, strip, tube, plate, and wire — integrated supply from a single qualified vendor
• ISO9001 quality management with multi-point traceability; SGS-accredited with BV and TÜV third-party inspection available

Source: DLX Alloy product catalog. EN 10204 3.1 MTC with full composition included on every shipment.

Third-party inspection by SGS, BV, or TÜV available upon request.

Which delivery condition gives the best spring performance?

For maximum final spring performance, we recommend solution-annealed wire for coiling — age harden after forming to develop full gamma-prime strengthening. Spring temper is preferred when your process involves only finish grinding with no forming. Our technical team reviews your spring design and recommends the optimal starting condition.

How consistent is the wire diameter across a full spool?

Our multi-pass drawing process with in-line diameter monitoring at every pass maintains ±0.01 mm tolerance from start to finish on each spool — and consistent across spools within the same production lot.

Can you supply a trial spool for performance validation?

Yes. Trial quantities are available for first-time buyers to validate coiling behavior, age hardening response, and final spring performance before committing to production volumes.

What documentation do you provide for aerospace or nuclear applications?

EN 10204 3.1 MTC with full chemical composition, mechanical properties, grain size, and heat number traceability as standard. AMS 5698 / 5699 certificates of conformance. Additional first-article inspection reports and third-party test reports available on request.

How do you ensure consistent gamma-prime precipitation batch to batch?

Chemistry control begins at vacuum melting with tight element targets within AMS specification. Our heat treatment cycles are validated against microstructural benchmarks to ensure consistent gamma-prime size and distribution. When your spring performance depends on predictable age-hardening response, we deliver that predictability batch after batch.