logo
Changzhou DLX Alloy Co., Ltd.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
中文
banner banner
Blog Details
Created with Pixso. Home Created with Pixso. Blog Created with Pixso.

Density melting point and physical properties of Monel K500 nickel based high-temperature alloy

Density melting point and physical properties of Monel K500 nickel based high-temperature alloy

2023-11-28

MONEL K-500 alloy has corrosion resistance comparable to 400, but has higher mechanical strength and hardness. Has good heat and corrosion resistance and long-term organizational stability. Mainly used for manufacturing turbine blades and gas turbine blades on aircraft engines with operating temperatures below 750 ℃; Used for manufacturing fasteners and springs on ships; Pump and valve components on chemical equipment; Scraping blades, etc. on papermaking equipment.

 

Vacuum self consumption furnace remelting is the process of holding a high-temperature alloy electrode that has been melted in a vacuum without slag, using a low-pressure direct current arc as a heat source to gradually melt the self consumption electrode. The melted high-temperature alloy liquid drops into a water-cooled copper crystallizer and then solidifies into ingots. The molten droplets transition into the crystallizer through an arc zone of up to 5000K, and the high-temperature alloy liquid comes into contact with a large area of vacuum, resulting in refinement under high vacuum. The molten metal converges into a molten pool in the crystallizer, continuing to obtain vacuum refining.